Low battery life in winter? How to protect electricity solar lights. This article the five-step method of "requirements → parameters → installation → operation and maintenance → budget" is unfolded, with supporting forms and lists to help you land quickly.

1. demand analysis

clear functional priority (security/atmosphere/decoration), construction conditions (whether it can be connected to the mains, whether excavation is allowed), environmental restrictions (wind and rain/salt spray/dust/extreme cold) and maintenance capability (whether it can be cleaned and overhauled regularly).

2. parameter selection

3. installation essentials

: 00001. horizontal ground cage and diagonal flange fastening, vertical deviation of light pole <1%

00002. Waterproof joint and heat shrinkable tube for all joints, through-wall hole gluing and rubber ring

00003. The utility model is grounded and protected against leakage; the solar model is fixed to avoid mechanical damage.

00004. The photovoltaic board faces due south and avoids blocking; the lamp head avoids direct exposure to human eyes to control glare.

00005. Set light control threshold/period, verify sensing range and delay

4. operation and maintenance and troubleshooting

· Quarterly cleaning the lampshade/photovoltaic panels; half-year fastening bolts and inspection joints; annual inspection of lightning protection

· Not bright: measuring voltage/Replacement method to locate the battery/drive/controller; Flashing: virtual connection or unstable drive; Poor battery life: insufficient charge or battery aging

· suggestions for spare parts: waterproof connector, driver, battery, light source module, sealing rubber ring

5. budget and reference configuration

example:30m trail, 12 8-12W lawn lamps, spacing 2.5-3m,IP65, induction + light control; Auxiliary materials include buried wire, waterproof joint, anchor bolt and grounding material. If it is the main courtyard of the villa, 6-8 (16-24W) 2.6m courtyard lights, 3000K color temperature, emphasizing level and comfort.

FAQ

q: power the same brightness different how to do?
A: look at the illumination/Uniformity measurement; related to light distribution, color temperature, finger, drive efficiency, installation height.

Q: are rainy areas suitable for solar energy?
A: you can choose a larger capacity battery and board, or use the mains to fill the light mixed power supply, and reduce the power gear.

Q: how to balance energy saving and beauty?
A: the main road timing is always on+ Induction brightening, branch pure induction; unified color temperature 3000-3500K.